The CE-6707 is a versatile tool that includes several functionalities in a single equipment for testing the electrical system. This portable instrument, ideal for both field and laboratory, is capable of testing / calibrating / gauging the most diverse types of equipment at secondary levels. For secondary levels it can be used to test relays: electromechanical, static or microprocessed.
It provides high power for testing high-burden (high impedance) electromechanical relays, such as electromechanical relays without the need for additional hardware. Performs three-phase measurements of current and voltage with verification of: sinking, harmonics up to 50th, active, apparent and reactive power in addition to real-time verification of the system waveform. It has 3 current channels and 4 high precision voltage channels for carrying out the most different tests. Being totally controlled by software (virtual instrumentation), allowing manual and automatic tests. It uses Digital Signal Processing (DSP) to create waveforms, allowing frequencies up to 3 KHz continuously.
If requested to the test set, you can perform IED’s tests with the IEC 61850 protocol, receiving and sending GOOSE and Sampled Value (SV) messages. Compares the times between traditional contact (rigid copper wiring) and sending the event via ethernet network via GOOSE msg. Evaluates possible differences between the analog signal and the SV msg.
We work with the sale and rental of this instrument, consult us.
Robust equipment, developed for the highest demands of field operation.
High technology equipment with the best cost benefit in the market.
We make your life easier through specialized application support.
Device allows testing on relays, transducers, meters, TC’s, TP’s, circuit breakers and power transformers.
Lightweight and Compact
Equipment easy to handle and transport. Accompanying transport case with wheels.
Personalized and practical “hands-on” courses with a reduced number of participants.
Total generation control in current, voltage, angle, frequency and harmonics with high precision.
Functionality of power quality measurements and digital oscillographs already included.
Developed for technicians and engineers, with easy use and quick learning.
Automatic software for testing. Increased productivity with efficiency gain with reduced test time.
Save time by automating and performing all the tests you need at once!
Test from electromechanical relays with high burden to the most technological IED’s.
Enables time synchronization by: GPS; IRIG; PPS and IEEE 1588 (PTP).
Highly friendly and intuitive software, with a wide variety of applications for all needs.
Performs the most diverse tests, from the most basic functions to the most advanced.
Company with 36 years of history. Fifth generation of test equipment.
It has tutorials and video classes with the most diverse applications.
Perfect solution for smartgrid testing and distributed generation.
Ready models according to the functionality of each differential or distance relay.
All software generates automatic reports that can be saved in PDF or Word®.
Software and test reports configured in: Portuguese, English or Spanish.
The control of the test set is done through the software Conprove Test Center “CTC”. In it, the user has access to several applications for manual and automatic tests of the main functions of protection of relays, meters, transducers, current transformers, voltage transformers, power transformers and circuit breakers.There are millions of lines of code to make your job easier.
Activate the English subtitle
– Integration with the supply chain;
– Good practices of individual and environmental management in the handling of components and PCBs;
– Compliance and security testing (IEC 61000-4-x, CISPR 16-x, IEC 60068-2-x, IEC 61326 e IEC 61010);
– High durability transport case (MIL-STD 810F, FED-STD-101C e ATA 300);
– Own laboratory containing world-class measurement standards with traceability to the RBC (Brazilian Calibration Network);
– Rigorous software-assisted quality control;
– Issuance of a calibration certificate with traceability to the RBC.
Areas of Application
More details? Do you want a quote? Contact us now:
Easy Payment Methods:
COD Finame: 2432086
|Date||Course||Name of Course|
|22/05/2023||Ensaios em Equipamentos de Secundário Utilizando Malas de Testes Conprove CE-600X, CE-67XX e CE-70XX (Prático)||05/2023|
|23/10/2023||Ensaios em Equipamentos de Secundário Utilizando Malas de Testes Conprove CE-600X, CE-67XX e CE-70XX (Prático)||10/2023|